80 inch Calacatta Viola freestanding double sink marble vanity

Marble Vanity Size Guide: Widths, Heights and Clearances

A marble vanity is made to last for decades, so getting the size right matters. This guide covers the common widths, heights and depths, the clearances to plan around, and how to choose between a single and a double sink.

Common vanity widths

  • 24 inch: the classic size for powder rooms and small guest baths. Enough for one basin and a pair of drawers.
  • 30 to 36 inch: a comfortable single vanity for a standard bathroom, with more counter space either side of the basin.
  • 42 to 50 inch: a generous single vanity, or a statement piece in a larger room.
  • 60 inch and up: the point where a double sink becomes practical.
  • 72 to 82 inch: a full double vanity for a master bathroom, with real space for two people at once.

Height

Traditional vanities sit around 30 to 32 inches high. Many homeowners now prefer a "comfort height" of about 34 to 36 inches, closer to kitchen counter height. If you choose a vessel sink that sits on top of the counter, lower the vanity so the rim of the basin ends up at a comfortable height.

Depth

Most vanities are 18 to 22 inches deep. In a narrow bathroom or powder room, a shallower vanity keeps the walkway clear. Because our pieces are made to order, depth can be adjusted to fit your room.

Clearances to plan around

Leave enough open floor in front of the vanity to stand and move comfortably. Building codes set minimums, and these vary by location, so always check your local code with your contractor. As a general rule, allow more space than the minimum wherever you can, and make sure drawers and doors can open fully without hitting a toilet, door or shower.

Single or double sink?

  • Choose a single sink if the vanity is under about 60 inches, or if you would rather have more counter space than a second basin.
  • Choose a double sink if two people use the bathroom at the same time and the wall allows 60 inches or more. At 72 inches and above, each person gets comfortable elbow room.

How to measure

  1. Measure the full width of the wall, and note windows, outlets, mirrors and the door swing.
  2. Mark the position of the existing water supply and drain.
  3. Measure the clearance to the toilet, shower and door.
  4. Send us the measurements and a photo of the wall. We confirm the final dimensions with you before production.

Explore our single sink marble vanities, double sink marble vanities and wall-mounted marble sinks, or request a quote with your measurements.

Back to blog